Toyota Sienta(10) Cabin Air Filter Replacement

---

Tools required: None

Pull the damper to the left to detach it from the glove box.

Open the glove box.

Push both sides of the glove box inward to release the stoppers at the back.

Pinch the filter cover lock knob (one location on the left side) and pull the cover toward you.

Replace the filter.

Notes

Toyota Sienta (10 Series) replacement procedure

The glove box appears to be the type that can be removed by pressing both sides inward.

The right side of the filter cover fits into a guide attached to the unit, so when removing it, pull it slightly toward the left-rear side.

The vehicle was equipped with an activated carbon type filter.

A practical car for everyday people that can be driven comfortably without any fuss.

It’s not too big and not too small, making it very easy to drive overall. Compared to the previous model, it feels slightly larger.

At first glance, the overall styling does not seem drastically different, but this model appears to take strong inspiration from the Renault Kangoo.

Some aspects of the interior atmosphere also follow that direction, giving it a feel that is somewhat uncommon among recent Toyota vehicles.

The equipment level is quite impressive as well, with features such as a front-facing camera coming standard.

It may feel a little unusual at first, but the front camera makes driving much easier in areas with poor forward visibility.

In reality, this kind of car may actually be the more practical choice for everyday use.