Nissan Juke Cabin Air Filter replacement

Nissan novelty! ?

Today will continue, I would like to introduce the cabin air filter of Juke(for right hand drive).

It is the height of the high car of the compact. 
Was wearing a large tire on the car of the size of the split was remaining in the impression.

The front also once seen it there is an impact, such as can be seen with it.

First, let’s go immediately chase!

 Remove the door of the glove box

First of all, please open the glove box. 
And always seeing the exchange procedure’s Denso you have reference, it has taken a such a way as to work by extending the hand from the bottom of the glove box in this state, but it is honest tough. 
It might be a cinch if Kai buts○ kun(怪物くん) or Luf ○ y(ルフィ).

So little to arrange, I tried to remove the door of the glove box. 
Remove Pull the left side of the damper to the left, and pull to the front direction with the left side of the glove box, so you miss the part that is engaged with a glove box, please remove it in the same way also the right Once out. 
That way, the door of the glove box is off.

 Remove the right-hand side of the panel

It is such a feeling removed. 
Then the panel on the right back and pull to the left. 
This will take off without such a big deal.

 Remove the filter cover

Since Removing the panel is white filter cover looks, cover will be out and remove by pulling the upper side of the handle to the front direction.

 Replace the filter

All you need to filter replacement.

It looks like that’s the angle that peeped from under.

We have the second half of the split and indifferently explanation, but it is anyway the filter is difficult to take out. 
Do not not to be out while the time being crushed up and down the filter, but still does not go smoothly.

The mounting of the filter cover, it is a little troublesome.

The lower side of the cover, but’s a way to keep the upper side from the inserted to the lower side of the part to put the filter, first of all the lower side is not quite smoothly allowed.

It might be good to know the position when removing the cover.

I think that some work time can also be reduced if you get used to it because, first let’s challenge!